Skip to main content

Setting Up COD Vanguard Hush Hack

Please make sure you are logged in, in order to view the Guides & Files

Please make sure that your Antivirus (external or Windows Defender), as well as your Firewall, are all disabled before using the cheat.

Follow this video-guide to know HOW TO

Steps to be done before using the cheat:

 

Virtualization Enabled:

There is an easy way to know if your virtualization is enabled or not. Use the task manager then check on Performance tab and finally verify that your virtualization is in effect enabled, otherwise like the BIOS, check how to enable this feature in your CPU model and if your current CPU support this technology.

apex hack

Step 1

Notes: Be sure to have Battle NET closed on this stage or the loader will not continue and self close.

Extract and open the Hush loader as an administrator.

Step 2

A command prompt should become visible. From here paste the serial key you have obtained from the shop and then press Enter.

 

*A confirmation is given right after, please do press any button to confirm the key load.
Notes: If by any reason this window self closes. Repeat the operation but this time wait 20-30 seconds before pressing any button

The loader will give you a few options to you. To understand them properly, we will explain one by one

Pressing the button 1: The Hush project will be loaded. From this point you can add a spoofer to disks. However, this spoofer could be unstable by a great amount of computers. It is then suggested skipping it with a “0” if you receive bluescreens.
Examples:
Assuming you accepted the spoofer. (1)
Proceed to accept this window if you’re willing to use the disk spoofer.

*The loader will request you now to create a “PIN”. It has to be a number generated by yourself (6 numbers. Like the example:301522). This PIN will determine the serial name changed in your disks

It is important to remember:

– If you set a PIN, be sure to always use the SAME PIN each injection.

–> Once you have set your PIN, CLICK ON THE COMMAND PROMPT AND PRESS ENTER TO CONTINUE.

*The loader will confirm your operation with the following message. and then remain on standby until you proceed with the next step.

Notes: Using the spoofer or not, you will be always redirected to this step from the image below.

Step 3

-Once you have finished the above step with the loader, proceed to open the game and when you reach the game multiplayer, press the BUTTON F5 one time to begin the injection to the game. (Press F5 INGAME, NOT AT THE LOADER COMMAND PROMPT).

The menu should appear to you on the left side of the screen. Operate with it the button DELETE to open/close it and clicking on the options to customize to your liking.

Frequently Asked Questions

COD Vanguard Hacks, Aimbot, no recoil, ESP, Wallhacks & More

Why I can't the game in Fullscreen mode?

Hush works as an external cheat, meaning that you must run the game in Borderless mode.

What game resolution should I use?

For this Testing we will be running the game in Borderless mode and 1920×1080 resolution.

The cheat is not loading. How do I fix it?

As the cheat information mentions, this cheat does require having the following: Virtualization Enabled, Secure Boot Disabled otherwise you will receive ERRORS AT THE COMMAND PROMPT

 

Also, This cheat requires Battle net being closed before injection as a security measure. You can open it once the injection is completed and read to open the game

Can I change my PIN?

Use ONE PIN CODE per customer. If you change your PIN code, the HWID will also change!! Beware!! Explained more on the manual.