Make sure you’re running Discord Overlay as enabled. Here is how to:
- Run Discord as Administrator!
- Go to discord settings and click on OVERLAY, and Enable in-game overlay.
- Check also at GAME ACTIVITY that Division 2 overlay ingame is ACTIVE.
Setting Up The Division 2 OLIMA Hack
Please make sure you are logged in, in order to view the Guides & Files
Please make sure that your Antivirus (external or Windows Defender), as well as your Firewall, are all disabled before using the cheat.
Follow this video-guide to know HOW TO
Steps done before using the cheat:
Virtualization Enabled:
There is an easy way to know if your virtualization is enabled or not. Use the task manager then check on Performance tab and finally verify that your virtualization is in effect enabled, otherwise like the BIOS, check how to enable this feature in your CPU model and if your current CPU support this technology. GUIDE
Be sure that you’re also running U-Play as an administrator too.
First, let’s disable the U-Play overlay to avoid future conflicts later on. To do this, go to the “Settings” tab from U-play loader, and then uncheck the ingame overlay for supported games, like shown in the screenshot.
*At the General Tab, uncheck the overlay for supported games.
Disable Direct X12 in-game:
Now we need to be sure that our game is not working with Direct X12. To do this, launch the game, go to the settings TAB, from there check over VIDEO and look for the Direct X12 renderer. Make sure this option is turned off. If it is, close the game.
Notes::
– Do not use this loader more than one time per windows session or the loading can get stuck at 77% and you will blue screen.
– If the virtualization is disabled. You will bluescreen as well at the 77%
-EXTRACT THE LOADER FROM THE ZIP!! If you run it from the zip folder, your menu will be displayed in an incorrect way (BIG FONT AND BROKEN)
– Be sure your SECURE BOOT IN YOUR BIOS IS DISABLED. Or this cheat will not work as well. You can check that by using the windows searcher, type: System information. Check the “secure boot state”
– Be sure that in effect Discord overlay is running in your game before doing the step 5. In case you press end without discord overlay, you will bluescreen with an error 0x000002-5
Begin with steps:
Step 1
With that being set, open the Olima loader as an administrator.
Step 2
For the first time customers, registration is needed using the command register (the command list is shown by typing the command “help”)
The ID and password is needed to login at this loader. Be sure you remember your ID and password as it is impossible for us to recover it.
Here is one example of registration:
–> I will register a new account and for example I want my ID being eclipse12 and my password 77128. (these credentials can be anything you like, just do not forget what are you registering!. Also special characters are forbidden!)
So I type the ID I want to register two times as well as the password I want to register two times and the key (In this case I am using a random key example 34N8-CYbS-jMh5-kHxF. You use the one you received in your email)
Example:
register eclipse12 eclipse12 77128 77128 34N8-CYbS-jMh5-kHxF
Check that each data inserted is separated by empty spaces.
Once you have set the ID/password/key press ENTER.
At the time you register, if everything worked properly, the timer as well as the builds available in Division 2 will be shown.
Example:
*You will be automatically logged. Your reset count HWID will be shown as well. Move to the next step.
To use the cheat for Division 2, simply type now:
use td2
Or
use td2 1
Note: The difference between “use td2” and “use td2 1” command :
Command ” use td2 ” ： THE DEFAULT AIMBOT. WE HAVE USED THIS METHOD FOR OVER 1 YEAR AND IT HAS NEVER BEEN DETECTED
Command “use td2 1” ： THE IMPROVED AIMBOT. THE NEW VERSION OF AIMBOT, IT WORKS BETTER THAN THE DEFAULT AIMBOT, IF THE DEFAULT METHOD DOESNT WORK FOR YOU, YOU WILL NEED TO USE THIS COMMAND TO INJECT.
OUR TD2 BYPASS IS THE BEST ON THE MARKET. WE ARE UNDETECTED SINCE RELEASE WHICH WAS OVER A YEAR AGO. YOU CAN RAGE AND KILL AS MANY AS PLAYERS & NPCS YOU WANT WITH OUR CHEAT.
Step 3
(NEW LOGIN). The next time you want to use the Olima loader again type LOGIN followed by the User ID that you have registered and your password and press enter, the rest “use td2” remains the same as explained above.
Example: Following the same credentials used at the registration in Step 2
login eclipse12 77128
*If you want to add a new key. First login and then use the command “addkey” followed by the new key you got. After that the builds will become available again.
Here is another example.
Your cheat will start loading up and preparing the injection. Once it has been finished, the loader will then, self close.
This window will confirm the injection, close it and then open the game.
Step 4
Start Division 2 and check that in effect Discord is running when you opened it. If that’s correct then you can proceed to the step 5. However if discord OVERLAY IS NOT PRESENT. DO RESTART Steam AND run DISCORD AS ADMINISTRATOR.
Notes. Sometimes Discord will take a bit long to open, around 20-30 seconds after opening the game. It is important the presence of discord overlay, otherwise you will bluescreen by doing the step 5
* The game will also notify you that the U-Play overlay has been disabled. Click on “Launch game” to run the game anyway.
Step 5
If you have checked discord running properly go to the game lobby and press the button END a couple of times until the menu shows up. Operate it by using the directional arrows and open/close the menu by using the same END button.
Remember. If discord overlay is not present, you will bluescreen!.
If you need to reinject by any reason, restart the pc. Do not use the loader more than 1 time per windows session.
Assuming you’re familiar already with the registration and general use with the loader I will proceed to explain the troubleshooting for the loader and the hacks.
While opening the loader:
-1. The common “Unknown error (random numbers)” example: unknown error (0x35a8f1e8)”. This means the loader is outdated and it needs to be redownloaded.
-2. “Server is restarting…” or a similar message means you have to try again after 1-2 minutes, until it works.
While “using” an item (command “use <item> <testid>”):
-1. Technical error, contact an admin: This happens because of two possible reasons; one is because your sub ran out, make sure your sub is still active, and the other one is because your used a test id which is not available.
-2. Injection Error 7: means your windows version is not supported (all w10 are supported but 1507, 1511 and 2004. This is already mentioned in cheat’s information page).
-3. Injection Error 0x2003: means you have some software blocking the bypass, it’s always the same software: Valorant, FaceIT, ESEA, EAC etc even Anti-Viruses, uninstall them if you have any of them. If it doesn’t work please contact our support.
-4. Injection Error 0x2005: means you just need to restart the pc. That should work.
-5. BSOD 0x10000004: means you have virtualization off and you must enable it in the BIOS.
While opening the game (or holding END):
-1. BSOD 0x10000000: I doubt this BSOD will happen to anyone with a CPU that is not more than 10 years old.
-2. BSOD 0x10000002: This means you have so many processes running in the PC and the bypass collapsed, close everything that they don’t really need to cheat.
-3. BSOD KMODE_EXCEPTION_NOT_HANDLED: This could happen from time to time so all you have to do is retry injecting, same procedure.
-4. BSOD KERNEL_SECURITY_CHECK_FAILURE: For some reason, in a few PCs (only 1 right now), this BSOD occurs due to the screenshot bypass and We have to fix it, just contact our support. This can also occur when you have Valorant anti-cheat running in your PC.
-5. Complete PC shutdown without BSOD: This could be because of the screenshot bypass as well, same procedure as mentioned above KERNEL_SECURITY_CHECK_FAILURE point.
-6. DPC_WATCHDOG_VIOLATION: Even though this BSOD is now less common, some people may have it, only solution for now is to revert the windows version 2 versions before, if they are 1909, tell them to go 1809 or 1803. If your CPU is poor, it will still BSOD.
-7. Random BSOD or crashes in game: This is due to Valorant or any other anti-cheat, which is not the game one, running. Just uninstall all antiviruses and anti-cheats that are not the game one. For example, people having this problem in EFT should uninstall EAC and Valorant if its installed, or EAC and FaceIT.
-8. BSOD 0X5……. Anything that starts with 0X5 means that you did not run discord overlay properly, please restart your pc and follow the steps above carefully.
IMPORTANT NOTE: Please make sure to uninstall Valorant anti-cheat because all it causes are problems and BSODs.
Frequently Asked Questions
The Division 2 Hacks, Aimbot, no recoil, ESP, Wallhacks & More
What is required to operate with the cheat?
In order to operate with this cheat we do require three major and essential features to be working. One is Discord as we need the overlay, the second a registration at OLIMA Loader and finally virtualization enabled in Bios.
Before and after launching the game with the cheat for the first time, one of them is disabling U-play overlay as it may conflict with Discord overlay which is the one needed for this cheat to work, and second, TURN OFF the DirectX12 function from the game settings.
What game resolution should I use?
For this test, the game is running in Fullscreen mode and 1920×1080 resolution.
I can't use this cheat in a PVP environment. What can I do?
In order to use this cheat in a PVP environment, it is necessary to check the button “Aim everyone” as the enemy players are considered allies in PVP. Keep that in mind.
Why do I need to open discord and enable the overlay?
It is important having Discord overlay, as the cheat will use that designated overlay to make the writing in-game.
The cheat worked fine first time, but now I am getting Bluescreen. How do I fix it?
By all means (and in order to avoid undesired BSOD) do not run the loader more than once per windows session.