Make sure you’re running Discord Overlay as enabled. Here is how to:
- Run Discord as Administrator!
- Go to discord settings and click on OVERLAY, and Enable in-game overlay.
- Check also at GAME ACTIVITY that Escape from Tarkov overlay ingame is ACTIVE.
There is an easy way to know if your virtualization is enabled or not. Use the task manager then check on Performance tab and finally verify that your virtualization is in effect enabled, otherwise like the BIOS, check how to enable this feature in your CPU model and if your current CPU support this technology. GUIDE
– Do not use this loader more than one time per windows session or the loading can get stuck at 77% and you will blue screen.
– If the virtualization is disabled. You will bluescreen as well at the 77%
-EXTRACT THE LOADER FROM THE ZIP!! If you run it from the zip folder, your menu will be displayed in an incorrect way (BIG FONT AND BROKEN)
– Be sure your SECURE BOOT IN YOUR BIOS IS DISABLED. Or this cheat will not work as well. You can check that by using the windows searcher, type: System information. Check the “secure boot state”
– Be sure that in effect Discord overlay is running in your game before doing the step 5. In case you press end without discord overlay, you will bluescreen with an error 0x000002-5
–> I will register a new account and for example I want my ID being eclipse12 and my password 77128. (these credentials can be anything you like, just do not forget what are you registering!. Also special characters are forbidden!)
So I type the ID I want to register two times as well as the password I want to register two times and the key (In this case I am using a random key example 34N8-CYbS-jMh5-kHxF. You use the one you received in your email)
Check that each data inserted is separated by empty spaces.
At the time you register, if everything worked properly, the timer as well as the builds available in Escape from Tarkov will be shown.
Example:
*You will be automatically logged. Your reset count HWID will be shown as well. Move to the next step.
(NEW LOGIN). The next time you want to use the Olima loader again type LOGIN followed by the User ID that you have registered and your password and press enter, the rest “use td2” remains the same as explained above.
Example: Following the same credentials used at the registration in Step 2
*If you want to add a new key. First login and then use the command “addkey” followed by the new key you got. After that the builds will become available again.
Here is another example.
Start Escape from Tarkov and check that in effect Discord is running when you opened it. If that’s correct then you can proceed to the step 5. However if discord OVERLAY IS NOT PRESENT. DO RESTART Steam AND run DISCORD AS ADMINISTRATOR.
Notes. Sometimes Discord will take a bit long to open, around 20-30 seconds after opening the game. It is important the presence of discord overlay, otherwise you will bluescreen by doing the step 5
If you have checked discord running properly go to the game lobby and press the button END a couple of times until the menu shows up. Operate it by using the directional arrows and open/close the menu by using the same END button.
Remember. If discord overlay is not present, you will bluescreen!.
If you need to reinject by any reason, restart the pc. Do not use the loader more than 1 time per windows session.
While “using” an item (command “use <item> <testid>”):
While opening the game (or holding END):
IMPORTANT NOTE: Please make sure to uninstall Valorant anti-cheat because all it causes are problems and BSODs.
In order to operate with this cheat we do require three major and essential features to be working. One is Discord as we need the overlay, the second a registration at OLIMA Loader and finally virtualization enabled in Bios.
For this test, the game is running in Fullscreen mode and 1920×1080 resolution.
It is important having Discord overlay, as the cheat will use that designated overlay to make the writing in-game.
By all means (and in order to avoid undesired BSOD) do not run the loader more than once per windows session.