Setting Up Hwid Spoofer Gamepron Hack

Step 1

Run Gamepron Spoofer Loader as an administrator.
For a first-timer, you need to click on the button Registration or if you already have a spoofer account, just skip this part and Login with your credentials.

Gamepron Registration process does not use Gamepron credentials and they are not related to each other, so make sure to not forget about the ID and password you’re going to use as WE CANNOT RECOVER THIS INFORMATION!!

Step 2

Go back to the initial window and Login with your created credentials. Choose the option Use a KEY and paste the serial you obtained from the shop.

*Paste your key and press ACTIVATE.
*Your sub time will be displayed here as well.

Step 3

Now with the key registered, press at the button SPOOF. It will request you the options to use, as well as the spoof method used. Select the NORMAL method for the majority of games.

*Most of the games will require disk/partitions and volumes options. However, in case you’re using the spoofer for games like COD or FN you will need the network adapters option and SMBios option. Do not use them to other games. The option SMBios can cause a bluscreen as well. Please do not use if it is not needed.

*Press the Button OK and allow it some time to complete.

—>One easy way to know if your disk serials have changed are by using the command prompt as administrator Before and After using this program to check that in effect your disk drive serials got changed. Using the following command:

Example.

BEFORE USING THE SPOOFER

AFTER USING THE SPOOFER

IMPORTANT NOTES:

*In case of using cheat, first do inject your cheat, most of the cheats will wait for you until you open the game, so during that period of time, use the spoofer and then log into the game. Do not do it on the opposite, because cheats are also HWID locked and using them from a spoofed PC will lead the cheats to not be used as well.

In short:
*Inject with the desired cheat (For example Midnight) /Apply the spoofer / Open the game.
*When you finish playing a game, do restart your computer. All the parameters will be reverted and back to normal settings. BY ALL MEANS, DO NOT OPEN THE Gamepron LOADER AGAIN WITH A SPOOFED MACHINE.

1- Having done a clean windows reset.
This is imperative and not optional in case of being hwid banned in the past. However, in case you have not been banned yet, you can skip this step. Without having done this you will be banned again due the tracking files from Valorant. Keep that ind mind.

2- This method will only work with the bios type set as UEFI.
There’s a high chance of failure having it as Legacy. Check this before using.

3- You must set the autologin at Riot as disabled.
as login again without being spoofed previously will lead you to a ban (in case of previous hwid bans)

4- If you get banned by cheating in your spoofed machine, you must re-do the step 1, even if you still have your original HWID unbanned. Also, you must always use new accounts or never flagged accounts. Login with a banned account will add again the tracking files and the step 1 will be needed one more time. Extreme care on this step.

Step 1

Once you have logged at the spoofer. Do press SPOOF as usual but instead of using the normal method, select the BOOT method this time. The PC will request you to do a restart.

The computer will restart and show you the spoof process here and start windows as usual.
—>If by any reason you get stuck here at your PC logo, shutdown the PC and repeat the process.

Example.

Finally when you’re back in windows, do make the same checking using the command prompt as administrator Before the spoof and restart and after using this program, checking that in effect your disk drive serials got changed.

Use the following command:

Example.

BEFORE USING THE SPOOFER

AFTER USING THE SPOOFER (Once you have restarted the machine)

If everything is correct and the serials changed, you can now create or use a valorant account as usual. DO NEVER CREATE NEW ACCOUNTS IN A NON SPOOFED MACHINE!!

The spoof process will remain active until your next windows restart.